Executive wet end designed specifically for 56-frame motors
Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
Two speed motors have four sets of insulated windings for increased efficiency
56-frame motor for added strength, cooler operating temperature, and longer motor life
Larger 2-1/2" intake for improved flow performance and reduced noise
Large 6-1/2" diameter wet end for higher head pressure
Split capacitor, (start and run) for less energy consumption
Thermally protected to extend life expectancy of motor
Highly versatile wet end can be rotated every 90
Dimensions (H x W x L): 9.08" x 8.05" x 8.875"
The Executive 56 Frame Spa Pump has an executive wet end designed for 56-Frame motors along with two double-shielded ball bearings with moisture-resistant grease for quieter operation and long life. The dual speed motors have insulated windings for increased efficiency and large, highly versatile 6-1/2"diameter wet end for higher head pressure. With Viton Seals and a split capacitor (start and run) for less energy consumption, along with a three year warranty on its motor and wet end, the Executive is a must.
Center vs. Side Discharge Pumps Swimming pool and spa pumps are classified, in part, according to the orientation of their discharge openings. Center discharge pumps have an opening located in the center of the wet end, while side discharge pumps have an opening located on the side of the wet end. Water is propelled through the openings and flows out through the jets in your spa. Side discharge pumps are up to 60% more efficient for pumping out high volumes of water than center discharge pumps.
What the frame size on a spa pump mean? The frame size on a spa pump is the physical size of the spa pump motor. The frame is the piece that mounts the wet end to the motor. The frame size is located on the motor's ID plate, usually marked with an F for frame size. The thru-bolt spacing is also an indicator of frame size. A 48 frame motor has bolts spaced less than 4 inches apart, and the 56 frame motor has bolts with spacing more than 4 inches apart.
** Please note that these parts are Non-Refundable. If there is a product fault it will only be under Warranty if it is installed by a Professional, Self installation voids Warranty.
Part #: 3721221-13
Alternative Options: 532-0762
YOU MAY ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)